Albany Pumps stand at Interschutz

Albany Pumps at Interschutz 2022

Albany Pumps are proud to be exhibiting from the 20th to the 25th June at Intershutz 2022, at Hannover exhibition centre Hall 12 stand F68. Intershutz is the principal European Fire Fighting exhibition. We will be showing our new foam concentrate gear pump for low viscosity foams and have a 3D printed version of the […]

Gear Pumps lubricating air compressor

Albany Pumps lubricating large air compressors

Albany have a long history supplying GC type gear pumps for lubricating large air compressors.  These are bespoke OEM pumps, designed to their customers requirements and are expected to run for long lives in remote locations.  In the photo, you can see two Albany pumps which have been made in a vertical arrangement to optimise […]

3D Printer for Pump Parts

3D Printing at Albany Pumps

Albany have recently acquired a new 3D printer to help with the process of making new products and modifications to existing products.  It has started making new prototype parts immediately.  These parts give all staff a chance to see quickly what new proposed products look like and get a feel for the parts, which can […]

Albany Exhibtion

Exhibition Plans for 2022

Albany are planning to attend two important exhibitions in 2022, as life gets back to normal post the pandemic.  We’re going to Intershutz and to Achema, the giant German chemical equipment exhibition. We’ve commissioned an exciting new stand to show case our products.  You can see it in the picture. We hope to see some […]

EHEDG Pumps

Joining the EHEDG and Campden BRI

Albany Pumps have now joined the EHEDG (The European Hygienic Engineering and Design Group) and Campden BRI, two organisations which we believe will be important to help us develop the food market for our pumps. Our aim is to achieve EHEDG certification for some of our products. Albany has a long history of producing pumps […]

Albany customised centrifugal pump

Highly customised Pump built by Albany

We’d like to show you an example of a highly customised pump made by Albany. This is a vertical centrifugal pump, built with an ABB ATEX approved motor, and has a pressure switch and gauges. It is intended for use by a bulk metering company on aviation fuel. This is typical of the type of […]

Albany GJ Dispensing Pumps

Albany GJ Dispensing Pumps delivering Honey

This picture shows a line of new 200 series Albany GJ dispensing pumps in a new application dispensing honey.  12 jars of honey are filled at a time on a conveyor in an automated process. The GJ type of pump is suited to applications like this throughout the food and pharmaceutical industries, not to mention […]

Albany edm machine

EDM Machine for Albany

Albany has recently purchased an EDM machine (electrical discharge machining).  This is an Agie Charmilles machine, and is ideally suited to making Albany’s most precise components, especially gears.  Here we can see our R&D Manager working on the machine. The benefits that Albany will see from using this machine are: The machine will make components with […]